1. Car & Truck Manual Transmission Parts Deals
  2. sku: 2091708048224531
  3. FORD

FORD 408.FD1S51 Housing 239 V8 1181479

fits make: Ford. year: 1951.

408.fd1s51 Ford 239 V8 Bell Housing Fits 1951 Sedan 1181479

( Part Type: Housing ), ( Conditions Options: Stamped W/fork Starter Plate ), ( Genuine Oem: Yes ), ( Ipn: 408.fd1s51 )

Review FORD 239 V8 Bell Housing Fits Sedan fits 1951

The Ford 408 FD1S51 239 V8 housing, part number 1181479, is a critical component of the Ford 1951 V8 engine. This V8 engine housing is specifically designed for the Ford Flathead V8 engine, which was widely used in Ford automobiles during the 1930s, 1940s, and 1950s.

This particular housing, the FD1S51 239, refers to the specific design and configuration of the engine block. The 'FD' prefix denotes the specific factory location where it was manufactured, while '1S' refers to the production sequence and '51' indicates the casting number. '239' signifies the displacement in cubic inches of the engine, specifically 239.17 cubic inches.

The Ford 408 FD1S51 239 V8 housing is a split-section design, which allows for easier engine assembly and disassembly. The housing is made of cast iron and features several important features that contribute to the engine's robustness and longevity. These features include:

1. Wet sump oiling system: This engine housing uses a wet sump oiling system, which keeps the oil in direct contact with the crankshaft during operation for improved lubrication and cooling.

2. Hemispherical combustion chambers: The housing incorporates semi-hemispherical combustion chambers, which provide greater compression ratio and more efficient combustion compared to flat-head engines.

3. Six main bearings: The housing supports six main bearings, ensuring a stable and well-balanced engine for improved performance and longer engine life.

4. Deep skirt castings: The deep skirt castings provide additional structural integrity and help prevent the engine from experiencing excessive vibrations.

5. Heat risers: The housing features heat risers, which allow oil to be circulated through the engine block's water jackets, ensuring efficient cooling of the engine during operation.

The Ford 408 FD1S51 239 V8 housing is a crucial piece of automotive history and a highly sought-after part for vintage Ford car enthusiasts. Its robust design and historical significance make it a valuable investment for anyone looking to restore or maintain a classic Ford vehicle from the 1950s.

Ford 408 fd1s51 239 V8 Housing: Pros, Cons, and Conclusion

Introduction:

The Ford 408 fd1s51 239 V8 housing is a powerful engine component often used in vintage and hot rod vehicles. This component can provide impressive performance and styles, but like any other automotive part, it comes with its unique advantages and disadvantages. In this article, we will discuss the pros and cons of investing in a Ford 408 fd1s51 239 V8 housing.

Pros:

1. Power and Performance: The Ford 408 fd1s51 239 V8 housing is known for its immense power and performance. Its large displacement engine delivers an impressive torque and horsepower output that is ideal for vintage cars seeking increased power and speed.

2. Classic Design: This engine component maintains the original and classic Ford V8 look that many enthusiasts cherish, making it an excellent investment for restoration projects, hot rods or even for those who wish to maintain the authenticity of their old cars.

3. Availability: Compared to other exotic or rare engine components, the Ford 408 fd1s51 239 V8 housing is widely available and relatively affordable, allowing more enthusiasts to enjoy the benefits that come with this engine upgrade.

Cons:

1. Complexity: The installation and maintenance of a Ford 408 fd1s51 239 V8 housing can be complex. It may require specialized tools, skills, and knowledge to install the engine component properly, which could add to the overall cost and time investment.

2. Fuel Economy: The Ford 408 fd1s51 239 V8 housing provides impressive performance but is less economical regarding fuel consumption. With its large engine size and high power output, it tends to consume more fuel compared to smaller, modern engines.

3. Environmental Impact: Older V8 engines, like the Ford 408 fd1s51 239, contribute more greenhouse gas emissions compared to modern engines due to their higher fuel consumption and less efficient combustion process.

Conclusion:

The Ford 408 fd1s51 239 V8 housing offers a unique blend of power, performance, and classic design, making it an attractive investment for automotive enthusiasts. However, it comes with challenges in the form of installation complexity, increased fuel consumption, and higher greenhouse gas emissions. Ultimately, the decision to purchase this engine component depends on an individual's priorities, budget, and whether they value the benefits that outweigh the potential drawbacks. If one is passionate about vintage cars, wants to enhance their vehicle's performance, and is willing to invest time and resources to maintain it, the Ford 408 fd1s51 239 V8 housing could be an excellent choice for them. If, on the other hand, they prioritize low maintenance and fuel efficiency, this engine component may not be the best fit for their needs.

Recommendation:

Before investing in a Ford 408 fd1s51 239 V8 housing, enthusiasts should weigh the pros and cons carefully. They should research the specific requirements for installation and consider the potential costs in time, resources, and money. To make an informed decision, consulting with experts, reading online resources, and seeking advice from experienced fellow enthusiasts can help potential buyers better understand the unique challenges and rewards that come with owning and maintaining this engine component. Adequate research and planning can help ensure a successful investment and a rewarding experience for Ford V8 enthusiasts.

Details:

Warranty does NOT cover labor, diagnostics, towing costs, rental car, or any other expenses related to an item being defective/damaged. If a return is accepted, please ship the item to address below. Covered under warranty: An engine block is found to be cracked and NOT rebuild able would covered the 90-day warranty.

Said convenience items are not covered under the 90-day warranty. Any bulbs or wiring still attached to the,Tail Light,assemblies are not warranted part of the listing in any way. Lack of these convenience items does not warrant a return. What is covered.

For example, when installing a transmission, the torque converter needs to be seated properly on input shaft. 3531 County Road 3 NW. Avondale, MN 55302. Transmissions: Transmissions will come with the torque converter and all sensors.

Bumper assemblies DO NOT come with Upper Grilles unless stated. Full warranty not available for items listed as CORE. Items listed as CORE are only guaranteed rebuild able.

No expedited shipping is available. Check the Q A section for Business Support. Axles Assemblies: Axle assemblies will not include any brake hardware: Calipers/Rotors/Shoes/Pads/Hoses/Brake Lines. Steering Columns: All steering columns sold will come without airbags.

part #: 408.fd1s51 price

  • $100.00

specifications manutransmission:

  • for makes: Ford
  • for years: 1951
  • part type: Housing
  • conditions options: Stamped W/fork Starter Plate
  • genuine oem: Yes
  • ipn: 408.fd1s51

seller manutransmission:

  • rating: 99.1%
  • # reviews: 34100
  • city: Annandale, Minnesota

general manutransmission:

  • Car Truck Parts Accessories > Transmission Drivetrain > Manual Transmission Parts
  • condition: Used

shipping manutransmission:

  • class: Standard
  • cost: $25.00
  • type: Fixed
  • transit: 2-6 Days
  • service: Standard

returns manutransmission:

  • policy: Returns Accepted
  • paid by: Buyer
  • time: 30 Days

payments manutransmission:

  • credit card: Visa
  • other
  • wallet: Apple-pay

offer manutransmission:

  • sold: 0
  • started: December 5, 2024
  • availability: In Stock
  • options: Ship-to-home
  • quantity: 1
for makes: ford, for years: 1951, part type: housing, conditions options: stamped w/fork starter plate, genuine oem: yes,
manufacturer: ford, category: auto parts > car truck parts accessories > transmission drivetrain > manual transmission parts, sku: 2091708048224531,

Ford 1181479 Is Similar To:

manutransmission logo
1 offer $100.00 USD
  • Offer #1: $100.00 price + $25.00 shipping estimate = $125.00* total.+$25.00 shipping

Copyright © manutransmission.com